Must ensure the laser tube filled with round return before the machine working. If more than 35 ℃ need replacement cycle of water, or to add ice water to reduce the temperature of the water, (recommended that users choose cooling machine, or the use of the two tank). The pump separately switched on, and run 2-3 minutes (so that the laser tube filled with wheel
Return). Water quality and temperature cycle of water directly influences the service life of laser tube, recommend the use of pure water, omega replica and control the water temperature at 35 ℃. Suggestion: each week cleaning tank and the replacement cycle of water a
The water in the water tank cleaning and replacement. To clean up the water tank,replace the wheel return, pump water return tank, connect the pump pipe is inserted into the water inlet, tidy up the joint. The cleaning tank: first closed power, unplug thewater inlet pipe, so that the laser tube water from
Dynamic flows into the water tank, water tank is opened, out of water pump, remove dirt on water pump.